The ideal partner

The Pumper is inserted between the box and the Hadron RDSA. It contains 12ml and feeds the dripper with liquid via its BF pin. It is compatible with other drippers, but its 30mm diameter restricts the choice.

Technical specs

Diameter 30mm
Height 36.4mm
Capacity 12ml
Weight 75.25g
Filling From the side
Materials Stainless steel/glass

What’s in the box?

  • Spare tank
  • Spare parts
  • User guide
  • Goodies

An ingenious squonk system

As usual, Steam Crave presents us with a product free from any manufacturing defects. At 36.4mm high and weighing in at 75.25g, the first word that springs to mind is imposing. The body of the Pumper is made of stainless steel. The deck can take drippers up to a diameter of 30mm. A wide seal around the 510 connector ensures there are no leaks.

Filling is done by removing the cap on the side of the Pumper. Slight knurling gives good grip. There is a little hole to allow the air to escape when closing to avoid pressurising the tank. A silicone seal on the cap ensures it is fully leak-proof. 

The opening is sufficiently wide to be able to use all the e-liquid bottles on the market. It’s a good idea to tilt the Pumper slightly to make it easier to fill.

Opposite the filling hole is the pushbutton used to operate the pump. Steam Crave states in the user manual (only in English) that one press delivers 0.22ml of e-liquid. You need to adjust the number of presses according to the quantity you want to send to the dripper tank.

The manufacturer also states that you need to place a drop of e-liquid on the two pushbutton seals to facilitate its operation. To do so, unscrew the body of the pushbutton from the deck. Then simply remove it from its compartment to have access to said seals.

The pump body, located inside the Pumper, can be fully dismantled for thorough cleaning. There is also an exploded view of the assembly in the user manual showing the diameter of the various seals.

Although the 510 connector is long enough for use in mech mode, we don’t recommend it. All of the metal parts that it is made of lead to a significant loss of conductivity.

The Pumper is very pleasant to use. Three or four presses on the pump are enough to sufficiently soak the fibre. Complete dismantling for cleaning does not pose any particular problem. Containing a comfortable 12ml, it provides long hours of vaping. 

In summary

 What we like

  • Easy to use
  • Good quality production
  • Large volume
  • Easy to dismantle for cleaning

 What we don’t like

  • Nothing
REVIEW OVERVIEW
Price-quality ratio
Vape quality
Manufacturing quality
E-liquid consumption
Ergonomy
Previous articleReview: Hadron RDSA – Steam Crave
Next articleUK E-Cig Summit Highlights US’s Ineffective Tobacco Control Strategies